Civil Engineering

Items 1 to 10 of 28 total

Page:
  1. 1
  2. 2
  3. 3

Grid  List 

  1. ASCE Standard ASCE/SEI 55-16 Tensile Membrane Structures (Cover Image)

    ASCE Standard ASCE/SEI 55-16 Tensile Membrane Structures

    Standard ASCE/SEI 55-16 provides minimum criteria for the analysis, design, and performance of membrane-covered cable and rigid member structures, collectively known as tensile member structures. It is applicable to both permanent and temporary structures. The requirements of this standard apply whether the tensile membrane structure is independent of or attached to another structure. Standard ASCE/SEI 55-16 updates the previous edition and now includes both load resistance factor design (LRFD) and allowable stress design (ASD) load combinations. This new edition incorporates air-supported structures in addition to conventional tensile membrane structures and frame-covered membrane structures, all in a single standard.

    Learn More
    As low as: $72.00
  2. 2015 IBC SEAOC Structural/Seismic Design Manual Volume 1: Code Application Examples

    2015 IBC SEAOC Structural/Seismic Design Manual Volume 1: Code Application Examples

    The 2015 IBC SEAOC Structural/Seismic Design Manual provides a step-by-step approach to applying the structural provisions of the 2015 International Building Code and referenced standards. Volume 1 contains code application examples based on the IBC and ASCE 7-10 including determination of seismic irregularities, combinations of structural systems, determination of drift, support of discontinuous systems, and analysis of seismic forces applied to equipment, non-structural elements and non-building structures.

    Learn More

    As low as: $56.75

  3. 2015 SEAOC IBC Structural/Seismic Design Manual Volume 3: Examples for Concrete Buildings (Cover Image)

    2015 IBC SEAOC Structural/Seismic Design Manual Volume 3: Examples for Concrete Buildings

    The 2015 SEAOC IBC Structural/Seismic Design Manual provides a step-by-step approach to applying the structural provisions of the 2015 International Building Code® and referenced standards. Volume 3 contains code application examples of concrete construction. Moment frames, braced frames and shear wall construction are analyzed.

    Volume 3 includes sample structures containing concrete moment frames or shear walls, diaphragm and pile design, including:

    • Reinforced Concrete Wall Reinforced Concrete Wall with Coupling Beams
    • Reinforced Concrete Special Moment Frame
    • Reinforced Concrete Parking Garage
    • Pile Foundation Design
    • Design of Concrete Diaphragm and Collector An excellent reference and study guide for the NCEES Structural Exam.

    This manual is an invaluable resource for civil and structural engineers, architects, academics and students.

    Learn More

    As low as: $48.50

  4. Minimum Design Loads for Buildings and Other Structures (ASCE/SEI 7-16) (Cover Image)

    Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE/SEI 7-16)

    Provides the most up-to-date and coordinated loading standard for general structural design. ASCE 7-16 describes the means for determining design loads including dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, earthquake, wind, and fire, as well as how to assess load combinations. The 2016 edition of ASCE 7, which supersedes ASCE/SEI 7-10, coordinates with the most recent material standards, including the ACI, AISC, AISI, AWC, and TMS standards. Significant changes in ASCE 7-16 include the following:

    • New seismic maps reflecting the updated National Seismic Hazard Maps
    • New wind speed maps, including new Hawaii maps, that result in reduced wind speeds for much of the United States, clarified special wind study zones, and separate Risk Category IV from Category III
    • New snow load maps incorporating regional snow data for areas that previously required site-specific case study zones
    • Updated rain duration provisions that align design requirements with International Plumbing Code provisions for drainage
    • Entirely new chapter covering tsunami design provisions, which are important to Alaska, Hawaii, California, Oregon, and Washington
    • New appendix provisions for fire design

    Standard provisions are accompanied by a detailed commentary with explanatory and supplementary information developed to assist users of the standard, including design practitioners, building code committees, and regulatory authorities.

    Standard ASCE/SEI 7 is an integral part of building codes in the United States and is adopted by reference into the International Building Code, the International Existing Building Code, the International Residential Code. Structural engineers, architects, and those engaged in preparing and administering local building codes will find the structural load requirements essential to their practice.

    Learn More
    As low as: $216.00
  5. Reinforced Concrete Masonry Construction Inspector's Handbook Tenth Edition (Cover Image)

    Reinforced Concrete Masonry Construction Inspector's Handbook Tenth Edition

    This edition of the Reinforced Concrete Masonry Construction Inspector’s Handbook incorporates requirements contained in the 2018 International Building Code, Building Code Requirements for Masonry Structures (TMS 402-16) and specification for Masonry Structures (TMS 602-16).

    Masonry Quality Control provisions include:

    • Materials
    • Installation
    • Testing Methods
    • Special Provisions

    This book is also used as a reference for the International Code Council’s Structural Masonry Special Inspection Certification Examination.

    Learn More

    As low as: $33.50

  6. 2015 IBC SEAOC Structural/Seismic Design Manual Volume 2: Examples for Light-Frame, Tilt-Up and Masonry Buildings (Cover Image)

    2015 IBC SEAOC Structural/Seismic Design Manual Volume 2: Examples for Light-Frame, Tilt-Up and Masonry Buildings

    The 2015 IBC SEAOC Structural/Seismic Design Manual provides a step-by-step approach to applying the structural provisions of the 2015 International Building Code® and referenced standards. Volume 2 contains code application examples of light-frame, tilt-up and masonry construction. Diaphragm flexibility, center of mass, collectors and chords, deflection and anchorage are discussed through examples. In and out-of-plane seismic loads are analyzed.

    Volume 2 includes sample structures of wood, cold-formed steel, tilt-up concrete and masonry, including:

    • Four-Story Wood Light-Frame Hotel
    • Cold-formed Steel Light-frame Three-story Apartment on Concrete Podium
    • Tilt-up Building with Plan Irregularities
    • Tilt-up Wall Building with Openings An excellent reference and study guide for the NCEES Structural Exam. 

    This manual is an invaluable resource for civil and structural engineers, architects, academics and students.

    Learn More

    As low as: $56.75

  7. 2015 Structural/Seismic Design Manuals – Materials Collection (2015 Vol. 1-3 and 2012 Vol. 4) (Cover Image)
  8. Snow Loads: Guide to the Snow Load Provisions of ASCE 7-16 (Cover Image)

    Snow Loads: Guide to the Snow Load Provisions of ASCE 7-16

    Snow Loads: Guide to the Snow Load Provisions of ASCE 7-16 supplies detailed, authoritative explanations of the snow load provisions contained in Minimum Design Loads and Associated Criteria for Buildings and Other Structures, Standard ASCE/SEI 7-16. With clear, concise language, Michael O'Rourke illustrates the key concepts for applying the provisions to the design of new and existing structures that could collect falling or drifting snow.

    Like its predecessors that accompanied earlier versions of ASCE 7, this new edition of Snow Loads discusses flat roof loads, sloped roof loads, partial loads, and all types of conventional drift loading. Driven by recent changes to the ASCE 7 snow load provisions, this guide describes:

    • Application of new ground snow load tables for seven states: Colorado, Idaho, Montana, New Hampshire, New Mexico, Oregon, and Washington
    • Latest research from Norway and Japan on the probability of snow sliding off roofs
    • Current thinking on how snow density changes over a winter season
    • Snow loads on air-supported structures
    • Updated provisions for nonbuilding structures, including open-frame equipment structures, pipes, and cable trays
    • Calculation of snow loads on process piping, which is especially useful to the petrochemical industry

    This guide includes 35 worked examples of real-life design problems, as well as answers to 20 frequently asked questions, including a new one on snow capture by solid walls.

    Snow Loads is an essential supplement to ASCE/SEI Standard 7 for all engineers, architects, construction professionals, and building officials who work on projects in regions subject to snow.

    Learn More
    As low as: $67.50
  9. 2015 Structural/Seismic Design Manuals – Complete Collection (2015 Vol. 1-3 and 2012 Vol. 4 - 5) (Cover Image)
  10. 2015 Structural/Seismic Design Manuals – Volumes 1-3 (Cover Image)

    2015 Structural/Seismic Design Manuals – Volumes 1-3

    This collection of the 2015 IBC SEAOC Structural/Seismic Design Manual contains the following three volumes, please note that the 2012 Editions of Volumes 4 & 5 are still applicable and relevant to the 2015 IBC. Members/Customers who need the complete collection volumes 1-5 applicable to 2015 IBC please click here 2015 Structural/Seismic Design Manuals – Complete Collection (2015 Vol. 1-3 and 2012 Vol. 4 - 5)

    Learn More

    As low as: $138.00

Items 1 to 10 of 28 total

Page:
  1. 1
  2. 2
  3. 3

Grid  List