2012 International Codes and References

Items 1 to 10 of 15 total

Page:
  1. 1
  2. 2

Grid  List 

  1. 2012 Plumbing and HVAC Collection
  2. 2012 International Plumbing Code®  (IPC®)

    2012 International Plumbing Code® (IPC®)

    Provides minimum regulations for plumbing facilities in terms of both performance and prescriptive objectives, and provides for the acceptance of new and innovative products, materials, and systems.

    Important changes to the IPC include:

    • Requirements for the design of a Siphonic Roof Drainage System have been added.
    • Gray water recycling requirements have moved to the body of the code in a new Chapter 13.
    • Hydro-mechanical and Gravity are the new terms for the two general types of grease interceptors.
    • Air admittance valves complying with standard ASSE 1049 are now allowed for venting chemical waste systems.
    • The length of a combination waste and vent system is now unlimited.
    • The Single Stack Vent System method has been added.
    • The code expands on suitable materials for pressurized sewage discharge applications and ratings.

    The IPC also includes its companion document, 2012 International Private Sewage Disposal Code®, that contains provisions for design, installation, and inspection of private sewage disposal systems, and provides flexibility in the development of safe and sanitary systems.

    Learn More

    As low as: $61.50

  3. 2012 International Mechanical Code®

    2012 International Mechanical Code®

    Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. First introduced in 1996, the IMC was developed with broad-based principles that make possible the use of new materials, methods and design.

    Changes include:
    • New and existing mechanical systems must be maintained in accordance with ASHRAE/ACCA/ANSI Standard 180.
    • Parking garage exhaust now defined as environmental air.
    • Includes specifications for grease reservoirs in commercial cooking exhaust duct systems.
    • Includes requirements for underground grease ducts.
    • Requires any combustible material in a return air plenum to be listed and labeled to verify compliance with ASTM E-84 or UL 723.
    • Air dispersion systems are now allowed.
    • New requirements for evaporative coolers.

    Learn More

    As low as: $61.50

  4. 2012 International Private Sewage Disposal Code®

    2012 International Private Sewage Disposal Code®

    This companion to the IPC includes provisions for design, installation, and inspection of private sewage disposal systems, and provides flexibility in the development of safe systems.

    Learn More

    As low as: $26.00

  5. 2012 International Fuel Gas Code®

    2012 International Fuel Gas Code®

    Addresses the design and installation of fuel gas systems and gas-fired appliances through requirements that emphasize performance.

    Learn More

    As low as: $61.50

  6. Significant Changes to the IPC®, IMC®, and IFGC®, 2012 Edition

    Significant Changes to the IPC®, IMC®, and IFGC®, 2012 Edition

    If you are sorting through a key code whether it is the International Plumbing, Mechanical, or Fuel Gas Codes® can be a daunting task. So when a code update occurs, you may feel even more overwhelmed. Fortunately, there is a resource that will break down all three of these codes so that you can easily identify key changes and their real-world applications Significant Changes to the International Plumbing Code®, International Mechanical Code®, and International Fuel Gas Code®, 2012 Edition addresses more than 125 of the most crucial changes contained in these codes. Each change analysis features the affected code sections and identifies the type of change: newly added text, a modification of the existing language, or deleted text. Accompanying each change are detailed illustrations and practical examples, which clarify some of the technical jargon and make the content more relevant.

    Learn More

    As low as: $30.00

  7. 2012 Transition from the 2006: Plumbing, Mechanical & Fuel Gas cover image

    2012 Transition from the 2006: Plumbing, Mechanical & Fuel Gas (PDF Download)

    This workbook will assist participants in implementing the transition from the 2006 Plumbing, Mechanical, and Fuel Gas Codes (PMG) to the 2012 PMG. It will include material relevant to the changes in the 2009 PMG. This workbook will focus on the key changes presented in the participant material.

    This workbook is used in an ICC seminar. To Hire ICC to Teach, click here.

    Learn More
    As low as: $18.00
  8. 2012 IPC Design, Installation & Inspection Principles cover image

    2012 IPC Design, Installation & Inspection Principles (PDF Download)

    Readers will be better able to understand and apply the critical concepts required to safely and efficiently design, install and inspect plumbing installations in accordance with the 2012 International Plumbing Code® (IPC®). Readers will benefit from understanding the core principles needed to correctly interpret and apply the code

    This workbook is used in an ICC seminar. To Hire ICC to Teach, click here.

    Learn More
    As low as: $25.20
  9. 2012 IFGC Design, Installation & Inspection Principles cover image

    2012 IFGC Design, Installation & Inspection Principles (PDF Download)

    Readers will be better able to discusses critical concepts of the 2012 International Fuel Gas Code® (IFGC®). It will provide a basis for the correct use of the code in the design, plan review, inspection, and analysis of projects. It will provide a clear understanding and correct use of the requirements identified by basic code provisions, tables and topics. Allows code users to apply the code in clear-cut situations and helps to build their understanding of the intent of the code when asked to make code compliance decisions.

    This workbook is used in an ICC seminar. To Hire ICC to Teach, click here.

    Learn More
    As low as: $25.20
  10. 2012 IFGC® Code and Commentary

    2012 IFGC® Code and Commentary

    A practical tool that helps you to master the code you deal with every day!This comprehensive publication provides a convenient reference for regulations in the 2012 International Fuel Gas Code® (IFGC®). Presented in an easy-to-reference format the commentary includes the full text of the code, including tables and figures, followed by corresponding commentary at the end of each section in one document. Every chapter begins with "General Comments" and "Purpose" sections followed by code and commentary to subsequent sections, tables and figures.

    This in-depth publication focuses on providing the full meaning and implications of the 2012 IFGC®. The commentaries are designed to suggest the most effective method of application, and the consequences of not adhering to the code.

    This is an excellent reference for code officials, engineers, architects, inspectors, plans examiners, contractors and anyone who needs a better understanding of the 2012 IFGC®.

    Free Demo premiumACCESS

    Learn More

    As low as: $82.00

Items 1 to 10 of 15 total

Page:
  1. 1
  2. 2

Grid  List